[HAM] Less bass to solid state leslie

[Jerry Fowler]

If this were my setup, I'd probably add a 15" woofer to my speaker array.
With a seperate amp for the 15", I'd send frequencies 80hz and lower to my
15" amp, and the rest to my leslie. This would allow the leslie to go louder
without making the low lows sound farty. The 80hz figure is subject to
testing in your rig, and might need to be as high as 100hz, or as low as
65hz.

"If money is no object, I can solve any problem."
-Jerry



On 8/25/06, dahoelscher at charter.net <dahoelscher at charter.net> wrote:
>
> I'd use an active cross-over on the input to the Leslie.
>
> (Actually I'd build an active filter with a sharp cut-off and an
> adjustable fc.  I'd use the design tools at National Semiconductor (web
> site) so I didn't have to think about it too much).
>
> - Drew
>
>
> --
> Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
> Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
> HammondWiki: http://www.dairiki.org/HammondWiki/
> hammond at zk3.dec.com archives: http://zk3.hammondforum.com/
>
>