[HAM] CT's instrument setup

[24bobs at netscape.com]

Alright, since I built the organ, here's what's up:

Upper left block:  Upper boost, Bass, Treble.

Lower Left block:  Master volume, percussion level, Leslie switch.

Upper right block:  Pilot light, start and run switches.

Lower left block:  Chorus depth.

Lower right front panel:  16', 5 1/3' and 8' borrowed fron lower B preset. The lower manual 16' goes to note 1, frequencies 1 - 12 are filtered.  A portion of the signal is returned to the drawbars, the amplified signal is routed to three slide pots ( on the panel) and fed to the non-vibrato channel of the pre-amp.  This provides a VERY loud lower manual bass, always without vibrato, or chorus.

The Leslie in the clips is one of our standard bi-amps.  Original tube amp for treble, feeding an Atlas PD60-A, our active 800HZ, 12db per oct crossover feeding a 250w solid state amp and a Gauss 15".  Yea, it's loud, but Chester can sit right next to loud sound sources and it dosen't bother him.  He can still hear too!

With the band, hw uses a cabinet with JBL speakers, driven by 1000W Yamaha amps.

Hope you enjoyed the clips  -  I sure did!

Bob Schleicher The Hammond Clinic


 

 

 

 

 

--
Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
HammondWiki: http://www.dairiki.org/HammondWiki/
hammond at zk3.dec.com archives: http://zk3.hammondforum.com/



_____________________________________________________________
Netscape.  Just the Net You Need.