[HAM] C3 and 122 Connection Error?

[JP]

Follow-up to my message below:

I reconnected the wires as per the Hammond wiki page this morning and all is well.  The Volume switch is working correctly AND the organ sounds better!  I wonder why they were connected like that?
Thanks,
JP


  Good Morning group,
  I suspect my Leslie 122  and C3 are not connected correctly.

  The terminal strip from left to right is;
  G    G    F    E    C    and the Black, Brown, Red wires from the connector box (047357) are connected as follows:

  G-Black,    G-Brown,    F-Red    E    C        

  Looking at the Hammond wiki page, displaying the 047357 connector box, http://www.dairiki.org/HammondWiki/LeslieBox%23047357
  It shows the connection as follows:

  G-Red    G-Black     and Brown to chassis ground.   

  I have been having problems with my Volume Normal/Soft switch not working correctly.  In the Soft position I have nearly no volume and in Normal I have what I guess would be normal.  (I'm new to Hammonds as you can see)  All resistors in this area are well within 20% BTW.

  Anyhow, should I make the change as listed on the Hammond Wiki page?

  Thanks,
  JP
  Hammond, LA