[HAM] CV - Starter motor not engaging TG - follow up

[David Damroze]

  I decided to take the cover over the drawbars off and see what I may 
have changed yesterday.
After removing the cover and looking around , I tried the run switch 
and it worked .
Put it back together -didn't work.
Soooo....I took it apart again . It seems to be starting intermittently.
  Basically - it seems that the start motor is not always connecting 
mechanically with
the TG shaft ( or however it works) .
  Any drawings available of the whole start mechanism  i.e. clutch , 
springs ,
  anything mechanical that might be out of alignment or worn ?

David D.
On Apr 18, 2007, at 5:53 PM, David Damroze wrote:

> It was working this morning.
>   Spent the afternoon replacing a couple of pedal actuators.
> Then removed the board over the manuals to fix a broken drawbar wire.
>   Put everything back together and now the starting motor turns but
> isn't engaging
> the TG or synch motor .
>   WTF ?
>   Could I have knocked something loose while fixing the other stuff ?
>
>   David D.
>
> --
> Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
> Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
> HammondWiki: http://www.dairiki.org/HammondWiki/
> hammond at zk3.dec.com archives: http://zk3.hammondforum.com/
>