[HAM] CV - Starter motor not engaging TG - follow up

[David Damroze]

On Apr 20, 2007, at 7:50 AM, Bohachewsky, Andrew V. wrote:

> Hey Dave,
>
> Yes, WD40 is NOT for the TG. It's a cleaning rather than lubricating 
> oil.
>
> I didn't think but I guess the CV has a solid wooden back - or is it 
> just a back panel? Can it be removed?
  The back is off. It's just that the TG is tight against the right side 
of the case under the preset board and
hard to get to . I can reach in there with the tube for the WD40 and 
wiggle things around a bit.

>  My A100 has an easily removed "pegboard" back, with it off the 
> starter motor assembly's right there. You will need to get ready 
> access to it (not with a shoe horn)
  I just used the shoe horn to push in on the motor shaft for a second.
> to clean it (try this first) or to bend/adjust/tighten the cage 
> carefully (recent posts suggest very slight movement can cause/solve 
> the problem).
>
> Andy

Thank you again

  David D.