[HAM] CV - Starter motor not engaging TG - follow up

[Bill Odum]

Try oiling the shaft with the gear thar engages and work it back and forth.
  Bill

David Damroze <damroze at excite.com> wrote:
  I decided to take the cover over the drawbars off and see what I may 
have changed yesterday.
After removing the cover and looking around , I tried the run switch 
and it worked .
Put it back together -didn't work.
Soooo....I took it apart again . It seems to be starting intermittently.
Basically - it seems that the start motor is not always connecting 
mechanically with
the TG shaft ( or however it works) .
Any drawings available of the whole start mechanism i.e. clutch , 
springs ,
anything mechanical that might be out of alignment or worn ?

David D.
On Apr 18, 2007, at 5:53 PM, David Damroze wrote:

> It was working this morning.
> Spent the afternoon replacing a couple of pedal actuators.
> Then removed the board over the manuals to fix a broken drawbar wire.
> Put everything back together and now the starting motor turns but
> isn't engaging
> the TG or synch motor .
> WTF ?
> Could I have knocked something loose while fixing the other stuff ?
>
> David D.
>
> --
> Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
> Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
> HammondWiki: http://www.dairiki.org/HammondWiki/
> hammond at zk3.dec.com archives: http://zk3.hammondforum.com/
>

--
Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
HammondWiki: http://www.dairiki.org/HammondWiki/
hammond at zk3.dec.com archives: http://zk3.hammondforum.com/



       
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
 Check outnew cars at Yahoo! Autos.