[HAM] Correction was DC filtering to the heater filament voltage of the AO28

[Kon Zissis]

Hi David Anderson and everyone.
I wrote:
>I wired up a 10000 uf smoothing capacitor across the he positive
>voltage wire and the negative voltage  wire I then connected these two
>wires then  to the heater filament wires.
>I disconnected the filament  winding centre tap from the ground for
this
>DC rectification wiring set up.
 
The last sentence should have said  " I RECONNECTED the filament winding
centre tap from the ground  for this DC rectification wiring set up '
 
Sorry for the mistake.
All the best.
Kon