[HAM] +67VAC on Leslie122 chassis

[hammondb3 at bellsouth.net]

-----Original Message-------
 
From: Christoph P. Kukulies
Date: 1/16/2007 3:39:47 AM
To: The Hammond Forum
Subject: Re: [HAM] +67VAC on Leslie122 chassis
 
On Mon, Jan 15, 2007 at 01:13:55PM -0500, hammondb3 at bellsouth.net wrote:
> Hello I have a 122 leslie that has +67VAC on its chassis thus the B-3 has +67VAC in its ground. It is a later model yellow metal amp without death-caps I believe. Do I have a bad tranny? does 67v ring a bell?  thanks
 
How did you measure that?        I used a mulitmeter to an earth ground. I am not positive about it being A/C or D/C

Is the organ itself grounded against the power ground?   Not at first , I ran a ground lead and it seems to have cleared up, or has it?      Thanks, Mark

I assume it is parasitic or leakage voltage. It will go away when you
ground the organ. If not, it will reveal the culprit :-).    
 
--
Chris Christoph P. U. Kukulies kuku_at_kukulies.org
 
--
Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
HammondWiki: http://www.dairiki.org/HammondWiki/
hammond at zk3.dec.com archives: http://zk3.hammondforum.com/