[HAM] using a Leslie 120 with an 038208controller?

[mtcasino]

Phil,

The 038208 Console Connector (part of the 8010 & 8020 Kits), is for use on
122 type Leslies. I would sell it unless you plan to get a 122 type Leslie
in the future.

The 7 pin connector on the rear of the T-3XX was for a Hammond series 10
tone cabinet. 

A better match for a controller would be one used for an M-100 such as the
8444 kit. That is if you want reverb to go to the 120. If not, a 26-1 kit
for the main speaker.

Mike

<snip>

I have a Hammond T-312 with an 038208 Leslie controller.  I also have 
a Leslie 120, and was wondering what the best way would be to use 
them with each other, or if it was even worth the effort?

I believe the controller is designed for a DC relay (not sure how 
many volts),and provides a line-level signal,while the 120 uses an AC 
(line voltage?) relay, and has no power amp.

So at the least, I'd need to install a power amp in the speaker, and 
change the relay.  Or would it be better to get a different Leslie 
controller?  Or swap for a different model Leslie (probably the most 
practical solution).