[HAM] Baldwin/Leslie BL-1

[Dan Richardson - Yahoo]

> I'm looking for the cable pinouts
> for a Baldwin Leslie BL-1.

OK, so I opened it up.
It's actually pretty sweet. Compact and light weight.
Double 6L6 and a 12AX7, lovely old 12" and a wood rotor.
Single speed fast/off.

Pin 1 goes to the fuse.
Pin 2 goes no place.
Pin 3 goes to the gain trim pot.
Pin 4 goes to the chassis.
Pin 5 goes to the motor relay solenoid.
Pin 6 goes to the power transformer.

So, I'm thinking:
1 AC hot
2 video input
3 unbalanced input
4 AC and signal ground
5 switch, but to what? Hot? Neutral? Ground?
6 AC neutral

Does that seem right?
I'll stick a meter on pin 5 after hotting it up,
maybe that will tell me something.

Dan