[HAM] Oiling a JR-20

Stuart subscriptions at equitywestgroup.com
Tue Sep 4 21:41:23 CDT 2007


On Tuesday 04 September 2007 19:26, Dave Bishop wrote:
> I've used baby oil, because it smells best when I inevitably spill it.  The
> smallest tube has the greatest effect on the amount of reverberation; I
> usually fill them with a turkey baster and then suck some back out to bring
> the level down to 1 inch from the top.  

Dave,

I have three equal diameter and length tubes with thick springs in them and 2 
thinner springs with no tubes. So which is the smallest tube?  How do I get 
access up inside the cabinet, to above the level of treble speaker baffle, to 
use the turkey baster. I can just see me trying to explain why I am covered 
in a combination of baby oil, mineral oil and atf.  Should the top come off 
easily?  I removed the four screws that look like the music rack screws from 
my B-2, but I didn't want to break anything.  Light tapping with a rubber 
mallet had no effect.

Stuart 


More information about the hammond mailing list

Hosted by zeni.net