[HAM] HELP WITH M-103-CORRECTION

[Scott Hawthorn]

At 03:28 PM 9/6/2007, Scott Hawthorn wrote:
>At 01:21 PM 9/6/2007, Dave Bishop wrote:
> >If you do a search on this list for "flash" or flashing" you should come
> >upon instructions about how to remove dendrites in the vibrato switch that
> >may be shorting the signal out.
>
>His vibrato works fine. It's the non-vibrato channel that doesn't.
>
>Mike, first, trade V1 and V2, both are 6AU6s. These V#s are stamped on the
>chassis. If the problem moves to the non-vib channel, it's the tube.
>Otherwise, it's likely to be pooped-out resistors servicing V1.

Oopsie, make that V2!