No subject

m100 are staying with the m100? Installing those on the C2 would be the
easiest - but a 147 hookup is dirt simple anyway - most definitely no
preamp needed (the Leslie needs a pretty hot sigjal which the organ
already provides, the preamps are mainly for amping line level signals
up to leslie input level). The "Captain-foldback" site has hookup info.
You will need a 6pin cable, a halfmoon leslie switch (or a foot/stomp
switch if you're gonna cheat :) and a female 6 pin socket mounted in a
little junction box. The socket gets one of the G terminals, gnd, ac and
ac return to power the Leslie and switched ac (from the switch) for the
motor relay in the Leslie. See the Captain for pin assignments.

Enjoy!

Andy 

-----Original Message-----

Would an interface to a 147 be that difficult? I have an adequite
understanding of electronic, so I feel this should be doable. 
The 147 is currently connected to an M100 series with no preamp,
Does the 147 Preamp actually amplify or does it just control AC & speed
switching.

The switching sounds easy any amplification would require i build a
preamp for the audio.
Any suggestions?
--
Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
HammondWiki: http://www.dairiki.org/HammondWiki/
hammond at zk3.dec.com archives: http://zk3.hammondforum.com/