[HAM] Hammond T400

[Jordan Kersten]

I never asked any questions about a hammond T400.

----------------------------------------
> From: xxcaptinxx at comcast.net
> To: hammond at zeni.net
> Date: Mon, 7 Jan 2008 11:37:42 -0600
> Subject: Re: [HAM] Hammond T400
> 
> There are two capped oil funnels the the top center right and left sides of 
> the motor that should get 5 to 8 drops each.  The two funnels on the TWG 
> don't need more than two teaspoonsful in each, but it can take a week or two 
> to travel to all the bearings.  4 oz of oil will last for years.
> 
> If the organ is at less than room temperature its possible that you'll also 
> get squeaky bushings.  The solution is to use a space heater or a lighbulb 
> to warm the interior.
> 
> As to the pedals, be sure that the organ is not on a pile carpet, or if it 
> is on a carpet, elevate the pedal side with a shim so that the pedals don't 
> sink in.  You can also tip the organ onto its front and clean the pedal 
> actuators of dustbunnies that may be causing the B pedal to stick.  If that 
> doesn't help, post back for more suggestions.
> 
> Regards,
> 
> Dave Bishop 
> 
> --
> Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
> Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
> HammondWiki: http://www.dairiki.org/HammondWiki/
> hammond at zk3.dec.com archives: http://zk3.hammondforum.com/
> 

_________________________________________________________________
Get the power of Windows + Web with the new Windows Live.
http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_012008