[HAM] Hammond Percussion

[Premecz Mátyás]

Oh yeah! The most important trick:
Use the M3 screws to hold the plastic spacers in place. It looks a bit
funny but works just as well.

You can use the busbar spacers from the M3, but you must use the
original drawbar spacers from the B2.

Mat


> On Tue, Jan 08, 2008 at 05:49:31PM -0600, Jordan Kersten wrote:
>> 
>> So you cannot use the original ratchet busbars, and replace the busbar spacers using the ones from theM drawbars?

> I don't know if you are refering to my method (where I use both, the
> old busbars and the M3 ones).

> As fas as I recall, the M3 spaces have different holes and theses spacers
> are made of a very unstable plastic rather than the old bakelite ones.

> When you are trying to drill up the holes of the newer ones to make
> the mounting screws go fit you will very quickly run out of usable pieces
> since they break in your hands. At least this happened to me.


> --
> Chris Christoph P. U. Kukulies kuku_at_kukulies.org

> --
> Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
> Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
> HammondWiki: http://www.dairiki.org/HammondWiki/
> hammond at zk3.dec.com archives: http://zk3.hammondforum.com/