[HAM] Can't get M-3 to wind up...

[jack larose]

Got it working!  Little Hammond oil applied directly to some areas (notably the synchronous motor shaft) seems to have done the trick.  Now to replace the tubes (about half no longer have getters, and a few are original, i.e. from 1959!)  And we should (hopefully) be in business.

Thanks for the help,

Jack


----- Original Message ----
From: Scott Hawthorn <organfreak at donobi.net>
To: The Hammond Forum <hammond at zeni.net>
Sent: Monday, June 23, 2008 8:54:23 PM
Subject: Re: [HAM] Can't get M-3 to wind up...

At 05:50 PM 6/23/2008, you wrote:
>At 02:17 PM 6/23/2008, jack larose wrote:
> >and the "start" switch is not a
> >"momentary on" switch, it just stays on or off.

Are you turning off the start switch 4 counts after turning on the run 
switch? If you're not, I'm gonna tell.

--
Subscription Options/Unsubscribe/Archives: http://www.zeni.net/hf/
Hammond-Leslie FAQ: http://theatreorgans.com/hammond/faq/
HammondWiki: http://www.dairiki.org/HammondWiki/
hammond at zk3.dec.com archives: http://zk3.hammondforum.com/
Beta Forum Port: http://www.hammondforum.com/forum/