[HAM] B3 Legs.

[goffmac747 at aol.com]

I'm not sure. i think alls I was able to do was tighten the screws that 
are on the bottom cross brace that are underneath the brace as it's 
dadoed into the side of the front legs. There are other bolts on the 
edges of the organ cab itself. You might want to shoot an email to the 
Goff's

Be careful not to over tighten anything. Might snap the heads off the 
bolts.


-----Original Message-----
From: Jordan Kersten <jordankersten at hotmail.com>
To: The Hammond Forum <hammond at zeni.net>
Sent: Mon, 3 Mar 2008 2:11 pm
Subject: Re: [HAM] B3 Legs.










I know the back legs have flat-head bolts.  I tightend those no 
problem.  But
how do you get to the bolts on the front legs?-Jordan-

> To: hammond at zeni.net> Date: Mon, 3 Mar 2008 00:55:15 -0500> From:
goffmac747 at aol.com> Subject: Re: [HAM] B3 Legs.> > I tightened the legs 
one time
on my B but that was so long ago and I > don't have it with me. Those 
legs are
bolted on. Did you check the > inside of the cab by taking off the back 
panel?
If memory serves there > are bolts somewhere. Need to get under the B 
with a
flashlight. I think > there are holes that hold bolts somewhere. It's 
not glue
that holds > that together that's for sure. I'm wanting to say there 
are 1/2
inch > sized bolt heads on a B.> > > -----Original Message-----> From: 
Jordan
Kersten <jordankersten at hotmail.com>> To: The Hammond Forum 
<hammond at zeni.net>>
Sent: Mon, 3 Mar 2008 8:06 am> Subject: [HAM] B3 Legs.> > > > > > > > > 
> >
Random question, but just out of curiosity, does anyone know how to > 
tighten
the> front legs on a B3? I can see the hollow space the leg goes up > 
through,
but how> did they get screws in there? Like the rear legs?-Jordan->