[HAM] A-100 reverb unit location

[Dave Bishop]

Looking from the back of the organ the amplifier is on the lower left side. 
The reverb amp is fixed on the lower right side, toward the front of the 
organ.  The reverb tank is directly behind the reverb amp, with its back 
flush to the organ's backpanel.  In orientation, the springs face toward the 
front of the organ, and the long dimension is parallel to the the organ 
floor.  There is a flange on the reverb tank so that it could be mounted 
flat.  In order to stand it up behind the reverb tank, there are a pair of 
wooden rectangular "standoffs" mounted to the organ floor the width of the 
flange, and the tank screws onto those standoffs to keep it upright.  You 
would want to remove the two side-mount straps shown in your picture and add 
your own standoffs.  Hope this vague description helps.

Regards,

Dave Bishop