The Roadster Factory · Magic Parts for Magic Cars
54
B O D Y S H E E T M E TA L
FRONT AND REAR VALANCES, TR6
British Motor Heritage has been working on the front valance panel, as the
original tools were not saved by Triumph. Heritage has tried hard to make
replacements, but the fit has been pretty bad. Recently, they came out with a new
lower valance panel made on new tooling. This panel appears to be much better, but
it is not available for the late U.S. models, 1975-76, with signal lamps under the
bumper. In a pinch, the holes for
signal lamps on the early valance
can be made smaller to make the
bumper holes required by the later
cars. Keep all of this in mind as you
consider your options.
Part No.
Description
No.Off
List Price
Your Price
Add/Cart?
Front Valance,
grille panel, 1969-74
1
529.95
399.91
Front Valance,
grille panel, 1975-76
1
529.95
399.91
Front Valance,
lower panel only; 1969-74
1
317.50
249.91
Rear Valance,
outer, 1969-72; license lamp on bumper
1
329.95
274.91
Rear Valance,
outer, 1973-76; license lamps on valance
1
339.95
259.91
Rear Valance Panel,
inner, lower
1
212.50
169.91
Rear Valance Reinforcement,
inner, upper
1
399.00
399.00
FRONT SPOILERS, TR6--NOW IN STOCK
The Roadster Factory has been stocking and selling new spoilers manufactured by our friend Brad
Woempner. These spoilers are excellent quality, and Brad has worked hard to make them look just like
originals. The only difference is two plugs on the backside necessitated by the manufacturing process. These
are not noticeable when the spoiler is installed, and there have been no complaints about fit or finish with
hundreds sold so far. We are about to run out of stock at the moment, but one-hundred new spoilers will be
in stock soon. TRF never charges backorders till the day they are shipped to the customer.
Part No.
Description
No.Off
List Price
Your Price
Add/Cart?
Spoiler,
front, TR6, 1973-76; can be retrofitted
1
177.50
129.91
to earlier years
Hardware Kit,
securing front spoiler to front valance;
1
5.95
3.91
full set of original hardware (20 pieces)
REAR DECK ASSEMBLIES, TR6
Rear decks are still made on original factory tooling, and they are still very fine. We have
experienced some problems with the jigging of the complete deck assemblies. Therefore, you may
be better off buying separate pieces if you don't need the inner reinforcements...
Part No.
Description
No.Off
List Price
Your Price
Add/Cart?
REAR DECK ASSEMBLY,
with inner reinforcements
1
649.00
649.00
Rear Deck,
fuel tank panel; outer skin
1
229.50
184.91
Front Section,
LH; cockpit side
1
94.95
74.91
Front Section,
RH; cockpit side
1
94.95
74.91
